Skip To Content

Editing events in the selection table

After choosing event or point feature records using the event selection tools and widgets available in ArcGIS Event Editor, you can view and edit the tabulated results using the tools shown below. To select events, see the following:

Event selection results
Примечание:

In cases where events on a route are edited and you want to see the previous events on the route at that location, don't use the Add Linear Event widget. Instead, edit events in the Event Selection table or the Attribute Set table. If this method is used, you can see what was previously on the routes at the specified measures.

ToolTool NameDescription
Очистить основные моменты

Clear Map Highlights

Clear all the event highlights on the map.

Подсветить все

Highlight All

Highlight all the selected events.

Приблизить к подсвеченным объектам

Zoom To Highlighted Features

Zoom to highlighted events on the map.

Приблизить к выбранным объектам

Zoom To Selected Features

Zoom to selected events on the map.

Вычислить поле

Calculate Field

Bulk edit a field's value.

Удалить подсвеченные объекты

Delete Highlighted Features

Delete the highlighted features. Visibility of this tool is configurable in the Event Editor config file.

Экспорт в CSV

Export to CSV

Export the selected features to a file in the CSV file format.

Расширенная сортировка таблиц

Advanced Table Sorting

Filter the attribute table view.

Свойства таблицы

Table Properties

Configure measure length and navigation to highlighted results.

Выбрать точку для перемещения

Select Point To Move

Select a point feature on the map to move the location.

Примечание:

This tool is available only when using Address Management capabilities in Event Editor. It is designed to work with address point features.

Обновить блокировки

Refresh Locks

Refresh the Events Attributes table to show new locks. This tool is enabled with conflict prevention.

Примечание:

This tool only works with events.

Снять блокировки

Release Locks

Release selected locks from the Event Attributes table. This tool is enabled with conflict prevention.

Примечание:

This tool only works with events.

Связанные таблицы

Related Tables

Show related records for the selected events. If you have multiple layers that represent the related data, you can choose the one to use to view the related data.

Примечание:

This tool is enabled only if relationship information is available through the map service. To publish a relationship in the map service, you must have both the Origin table or event feature class and the Destination table in your map. Simple relationship classes with one-to-one (1:1) or one-to-many (1:M) relationships are supported.

Editing individual records

  1. Double-click a cell in the table to allow its value to be edited.

    Edited cells in the table appear in yellow until saved.

    Примечание:

    Домены кодированных значений и домены диапазонов поддерживаются при настройке любого поля в таблице Event Attributes.

  2. To make the changes to the cells in the table permanent, click Save to save the edits.

    A Save Options dialog box may appear depending on your configuration.

    Save Options dialog box
  3. Optionally choose a save option.

    Determining whether any of these options is applicable should be based on the reasons for editing the events.

    Примечание:

    Merge coincident events with the same attributes that are edited only works with nonreferent events.

    • If the edits are for error correction or a similar workflow, and the event record does not need to be retired and time sliced because the changes are correcting a mistake, do not check the Retire edited events and create new events effective check box.
    • If the edits represent changes to the events at a certain time (such as a speed limit changing from 50 to 55 on 09/22/2014), check the Retire edited events and create new events effective check box and click the date drop-down arrow to choose the retirement date, or type the date in the date combo box. The old event will be retired and the new event will begin on the specified date.
    • If multiple edited events are coincident in measure and attributes and you want to combine them into a single event record, check the Merge coincident events with the same attributes that are edited check box.
    • If you want to keep events that are coincident in measure and attributes as different event records, do not check the Merge coincident events with the same attributes that are edited check box.
  4. Нажмите ОК.

A confirmation message appears at the lower right once the edited event is saved.

Примечание:
  • If a cell is gray, it's unavailable and can't be edited.
  • If a cell is white, it can be edited.
  • If a cell is yellow, it has been edited in this edit session but the edits have not been saved.
Editing individual cells
Примечание:

If a message appears that is related to acquiring locks, the inability to acquire locks, the need to reconcile, and so on, Roads and Highways conflict prevention is enabled in ArcGIS Event Editor.

Refer to the following table for a list of lock symbols and their meanings.

SymbolDescription
Блокировка события получена

The event lock has been acquired by the user. The event is editable.

Блокировка события недоступна

The event lock has been acquired by another user or by the same user in another version of the data. The event is not editable.

No symbol

No lock exists. A lock can be acquired.

Bulk editing event fields

If you want to enter the same value for a field in several events, follow the steps below.

  1. Click the Calculate Field button Вычислить поле on the toolbar of the Event Attributes table.

    The Field Calculator dialog box appears.

  2. Click the Update Field drop-down arrow and choose the field to be updated.
  3. Type a value for the field in the Field Value text box.

    Подсказка:

    If the field has a coded value domain, choose a value from the Field Value drop-down menu. If the field is a date field, choose a date from the calendar.

    Примечание:

    Домены кодированных значений и домены диапазонов поддерживаются при настройке любого поля в таблице Event Attributes.

  4. Нажмите ОК.

    The records in the Event Attribute table are updated.

  5. Click Save.

    A Save Options dialog box may appear depending on your configuration.

    Save Options dialog box
  6. Optionally choose a save option.

    Determining whether any of these options is applicable should be based on the reasons for editing the events.

    • If the edits are for error correction or a similar workflow and the event record does not need to be retired and time sliced because the changes are correcting a mistake, do not check the Retire edited events and create new events effective check box.
    • If the edits represent changes to the events at a certain time (such as a speed limit changing from 50 to 55 on 09/22/2014), check the Retire edited events and create new events effective check box and click the date drop-down arrow to choose the retirement date, or type the date in the date combo box. The old event will be retired and the new event will begin on the specified date.
    • If multiple edited events are coincident in measure and attributes and you want to combine them into a single event record, check the Merge coincident events with the same attributes that are edited check box.
    • If you want to keep events that are coincident in measure and attributes as different event records, do not check the Merge coincident events with the same attributes that are edited check box.
  7. Нажмите ОК.

A confirmation message appears at the lower right once the edited event is saved.

All the rows in the field get the updated value from step 3.

Bulk editing event fields
Примечание:

If you find an unavailable record, that is, none of its cells are editable, check to see if the event ID for that record is missing or null.

To prevent null event IDs when adding events, do the following:

  • Ensure the event ID field's data type is a string with a minimum length of 32 characters. In such cases, when adding a new event and not providing a specified event ID, Event Editor automatically assigns a GUID to the event.
  • If the event ID data type is not a string with a minimum of 32 characters, Event Editor will not automatically assign a GUID for the event. In such cases, define attribute sets to designate the event ID as an attribute for input. For more information about configuring and defining attribute sets, see Producing attribute sets and Configuring attribute sets.

Viewing related records

If relationship information is available through the map service, you will see the Related Tables button. To publish a relationship in the map service, the Origin table or the event feature class and the Destination table must be in your map document. Simple relationship classes with one-to-one (1:1) or one-to-many (1:M) relationships are supported.

Related Records
Примечание:

The records in the Related Records table are for viewing purposes only and can't be edited.

  1. Click the Related Tables button Связанные таблицы.
    Related options
  2. Click the name of the related record you want to access for the selected events.

    If you have multiple layers that represent the related data, you can choose the one to use to view the related data.

Связанные разделы