Counter status view glossary

The counter status view glossary provides a list of table column names and descriptions for each counter type status view.

System status view

The following table describes the table columns for the system counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Counters	The number of perfmon counters being monitored for that host name.
Last Update	The time the last data sample was collected.
% Processor Time	The percentage of elapsed time that the processor spends to execute a nonidle thread. It's calculated by measuring the percentage of time that the processor spends executing the idle thread and then subtracting that value from 100%.
Available Memory GB	The amount of physical memory immediately available for allocation to a process or for system use. It's equal to the sum of memory assigned to the standby (cached), free, and zero page lists.
Committed Memory GB	The physical memory in use for the space that has been reserved in the pageFile should it need to be written to disk. The commit limit is determined by the size of the pageFile.
Disk % Idle	Reports the percentage of time during the sample interval that the disk was idle. A low % Idle Time value (under 10%) indicates that the disk is being heavily used and could potentially reduce performance.
Disk % Used	Reports the percentage of each disk that's occupied with stored data.
Network Sent mbps	The rate at which bits are sent over each network adapter, including framing characters. Units in Megabits per second.
Network Received mbps	The rate at which bits are received over each network adapter, including framing characters. Units in Megabits per second.
C:\pageFile.sys % Usage	Reports the percentage of pageFile that's currently in use by the system.
C:\pageFile.sys Usage GB	Reports the size of pageFile in GB that's currently in use by the system.
Sample Interval	The amount of time in seconds between collection of data from the host.
Value	The value from the last data sample.
Collection Time (sec)	The amount of time taken to collect the statistics for that counter.

Process status view

The following table describes table columns for the process counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Counters	The number of counters being monitored for that host-process name.
Last Update	The time the last data sample was collected.
% Processor Time	The percentage of elapsed time that the processor spends to execute a nonidle thread. It's calculated by measuring the percentage of time that the processor spends executing the idle thread and then subtracting that value from 100%.
Count Total	The number of processes with that name.
Count Active	The number of active processes with that name.
Count Idle	The number of idle processes with that name.
Virtual GB	The total amount of memory (GB) created on the system using the hard disk to simulate additional random-access memory.
Private GB	The amount of memory (GB) exclusively used for a specific process.
Sample Interval	The amount of time in seconds between collection of data from the host process.
Value	The value from the last data sample.
Collection Time (sec)	The amount of time taken to collect the statistics for that counter.

ArcGIS status view

The following table describes the table columns for the ArcGIS counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Type	The service type as defined in ArcGIS Server Manager.
Last Update	The time the last data sample was collected.
Folder	The folder name in ArcGIS Server Manager where the service was published.
Service	The ArcGIS Server service name.
Cluster	ArcGIS Server cluster name.
Nodes	The number of machines in the cluster.
State	Service is either started or stopped.
MinPerNode	The minimum number of instances of the service to create on each node within the cluster. The default is 1.
MaxPerNode	The maximum number of instances of the service to create on each node within the cluster. The default is 2.
MinTotal	The total minimum instances across all nodes.
Max	The maximum number of instances of a SOC process. Each SOC process can have one or more service instances of the same service configuration running in it.
Busy	The number of instances of a SOC process that are currently busy. Each SOC process can have one or more service instances of the same service configuration running in it.
Free	The number of instances of a SOC process that are currently free. Each SOC process can have one or more service instances of the same service configuration running in it.
Health Check	The value for this counter is obtained directly from the ArcGIS REST API. A value of zero indicates the site is healthy, and a value of 1 indicates the site is unhealthy.
Errors	The count of errors in the ArcGIS service log.
Log-Severe	The count of severe errors in the ArcGIS Server log.
Log-Warning	The count of warnings in the ArcGIS Server log.
Throughput (Tr/sec)	Amount of work (in transactions per second) performed by a system. Throughput can be established based on demand by defining user workflows. Throughput, specifically maximum throughput, is a characteristic of a given system for a type of work. This is a supply-side definition of throughput.
Busy Time per Tr (sec)	The total time (seconds) per transaction consumed by a specific service in the ArcGIS Server site.
Tr	The number of transactions since the last sample interval time.
Transactions	The total count of all transactions performed since the ArcGIS Server service was started.
Capabilities	See ArcGIS Server Capabilities.
Pooling	See ArcGIS Server Pooling.

Http status view

The following table describes table columns for the Http counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Last Update	The time the last data sample was collected.
Response Time(sec)	The time in seconds it takes to receive a response from a request.
Content Length	The number of bytes used in an HTTP request for a specific URL.
Response Code	A three-digit number that indicates the status of a response received after making an HTTP request. A value of 200 to 202 is desired, indicating success.
JSON Error Code	A value of zero indicates that there is no JSON error. A value greater than zero indicates that a JSON error is present.
Collection Time(sec)	The amount of time in seconds to collect statistics for the HTTP item.
Webadaptor Error Code	The HTTP response code for the Web Adaptor. A code of 200 indicates the HTTP response is satisfactory.
Network Time(sec)	The amount of time in seconds taken to traverse the network before reaching a server.
Server Time(sec)	The amount of time in seconds taken after the request reaches the server to process the request.
Sample Interval	The amount of time in seconds between collection of data from the URL.
Value	The value from the last data sample.
Collection Time (sec)	The amount of time taken to collect the statistics for that counter.

Portal status view

The following table describes the table columns for the portal counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Storage Available	The amount of available gigabytes for storage of portal content.
Health Check	The value for this counter is obtained directly from the ArcGIS REST API. A value of zero indicates the site is healthy, and a value of 1 indicates the site is unhealthy.
License Expires (Days)	The number of days to portal license expiration.
Log-Severe	The count of severe errors in the portal log.
Log-Warning	The count of warnings in the portal log.
Status Federation	This counter only appears when the portal is federated with ArcGIS Server. A value of zero indicates the federation status is OK.
Status Machine	The status of the portal-registered machines. A value of zero indicates the machines are accessible.
Last Update	The time the last data sample was collected.
Desktop Content	The total count of desktop items in the portal.
Web Content	The total count of web items in the portal.
Collection Time (sec)	The amount of time taken to collect the statistics for that counter.

Note:

See the Portal for ArcGIS documentation for additional definitions.

DB status view

The following table describes the table columns for the DB counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Counters	The total number of database counters being monitored.
Last Update	The time the last data sample was collected.
Interval	The amount of time in seconds between collection of data from the database.
Value	The result of the SQL query executed in the database.
Collection Time (sec)	The amount of time taken to collect the statistics for that counter.

RDP status view

The following table describes the table columns for the RDP counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Counters	The total number of RDP counters being monitored.
Last Update	The time the last data sample was collected.
Total Sessions	The total number of remote desktop sessions.
Inactive Sessions	The number of remote desktop sessions that are not active.
Active Sessions	The number of active remote desktop sessions.
Sample Interval	The amount of time in seconds between collection of data from the host.
Value	The value from the last data sample.
Collection Time (sec)	The amount of time taken to collect the statistics for that counter.

Amazon status view

The following table describes the table columns for the Amazon counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Counters	The total number of Amazon counters being monitored.
Last Update	The time the last data sample was collected.
Sample Interval	The amount of time in seconds between collection of data from the collection.
Value	The value from the last data sample.

Note:

See the Amazon account documentation for additional definitions.

Ext status view

The following table describes the table columns for the Ext counter status view:

Column name	Description
Alerting	Indicates whether the counter is alerting (red) or within expected operating values (green).
Monitor	Indicates whether the monitoring service on that host name is receiving metrics (green up arrow) or not (red down arrow).
Counters	The total number of extension counters being monitored.
Last Update	The time the last data sample was collected.
Sample Interval	The amount of time in seconds between collection of data from the extension.
Value	The value from the last data sample.