Skip To Content

Use Arcade expressions with Append Data

There are multiple tools in the GeoAnalytics Tools toolbox that allow you to apply an expression:

The GeoAnalytics Tools that use expressions have different purposes, as well as limitations on which expressions can be applied. At 10.6 or later, all expressions used in GeoAnalytics Server support Arcade.

Learn more about Arcade Functions

Expressions in Append Data

Expressions are used in the Append Data tool to calculate values for the input layer field specified. When you are not appending field values from the append layer, use expressions to determine how each feature will be populated. An Append Data expression should result in values of the same type as the field. Expression examples are included in the sections below.

Mathematical operator and function examples

Append Data expressions are able to mathematically process numbers. The following table shows a sample of available operations.

Learn more about mathematical operations and functions available in Arcade

OperatorExplanationExampleResult

a + b

a plus b.

fieldname contains a value of 1.5.

$feature["fieldname"] + 2.5

4.0

a - b

a minus b.

fieldname contains a value of 3.3.

$feature["fieldname"]- 2.2

1.1

a * b

a times b.

fieldname contains a value of 2.0.

$feature["fieldname"] * 2.2

4.4

a / b

a divided by b.

fieldname contains a value of 4.0.

$feature["fieldname"] / 1.25

3.2

abs( a )

Returns the absolute (positive) value of a.

fieldname contains a value of -1.5.

abs($feature["fieldname"])

1.5

log( a )

Returns the natural logarithm (base E) of a.

fieldname contains a value of 1.

log($feature["fieldname"])

0

sin( a )

Returns the trigonometric sine of a. The input is assumed to be an angle in radians.

fieldname contains a value of 1.5707.

sin($feature["fieldname"])

1

cos( a )

Returns the trigonometric cosine of a. The input is assumed to be an angle in radians.

fieldname contains a value of 0.

cos($feature["fieldname"])

1

tan( a )

Returns the tangent of a. The input is assumed to be an angle in radians.

fieldname contains a value of 0.

tan($feature["fieldname"])

0

sqrt( a )

Returns the square root of a.

fieldname contains a value of 9.

sqrt($feature["fieldname"])

3

min( a, b )

Returns the lowest-valued number between a and b.

fieldname contains a value of 1.5 and a value of -3.

min($feature["fieldname"], -3)

-3

max( a, b )

Returns the highest-valued number between a and b.

fieldname1 contains a value of 1.5, and fieldname2 contains a value of -3.

max($feature["fieldname1"], $feature["fieldname2"])

1.5

constrain(<value>,<low>,<high>)

Returns the input value if it's within the constraining bounds. If the input value is less than the low value, it returns the low value. If the input value is greater than the high value, it returns the high value.

constrain($feature["distance"], 0, 10)

constrain($feature['Store dist'], 6, distance)

Returns 0 if distance is less than 0, 10 if distance is greater than 10, and distance otherwise.

Returns 6 if Store dist is less than 6, distance if Store dist is greater than distance, and Store dist otherwise.

A multiplication example for calculating a field value is shown.

$feature["Distance"] * 2

Text function examples

Append Data expressions are able to process text. The following table shows a sample of available operations.

Learn more about text functions available in Arcade

OperatorExplanationExampleResult

concatenate( <values>, <separator>)

Concatenates values together and returns a string.

  • values—An array of string values to concatenate.
  • separator ( optional)—A separator to use for concatenation if the values parameter is an array, or a string to concatenate if a single value is provided for the first parameter. If not provided, it will be empty.

fieldname contains a value of GeoAnalytics.

Concatenate ([$features["fieldname"], "is", "great!"], ' ')

GeoAnalytics is great!

find(<searchText>, <text>, <startPos>)

Finds a string within a string. Wildcards are not supported.

  • searchText—The substring to search for.
  • text—The text to search.
  • startPos (optional)—The zero-based index of the location in the string to search from.

fieldname1 contains a value of 14NorthStreet and fieldname2 contains a value of North.

find($feature["fieldname2"], $feature["fieldname1"])

2

lower(<value>)

Makes a string lowercase.

  • value—The string to be made lowercase.

fieldname contains a value of GEOANALYTICS.

lower($feature["fieldname"])

geoanalytics

A text example using find and lower is shown.

find(("north"), lower("146NorthStreet"))

Date function examples

Append Data expressions are able to process dates. The following table shows a sample of available operations.

Learn more about date functions available in Arcade

In Arcade, month values range from 0 (January) to 11 (December), days from 1 to 31, hours from 0 (12:00 a.m.) to 23 (11:00 p.m.), minutes and seconds from 0 to 59, and milliseconds from 0 to 999. Arcade dates return time values in the location of your GeoAnalytics Server.

OperatorExplanationExampleResult

date( <value>, <month>, <day>, <hour>, <minute>)

Parses a value or set of values into a date string.

  • value(optional)— Either the number of milliseconds since January 1, 1970, UTC or a number representing a year. If a year is specified, the month and day must also be provided in subsequent parameters. This value may also be a date string or an ISO 8601 string to be converted into a date.
  • month (optional)—The month (0–11), where 0 is January and 11 is December.
  • day (optional)—The day of the month (1–31).
  • hour (optional)—The hour of the day (0–23).
  • minute (optional)—The minute of the hour (0–59).
  • second (optional)—The second of the minute (0–59).
  • millisecond (optional)—The millisecond of the second (0–999).

fieldname contains a value of 1476987783555.

Example 1: Date($features["fieldname"])

Example 2: Date(2017,0,14,0)

Example 3: Date()

Example 1: 20 Oct 2016 11:23:03 am

Example 2: 14 Jan 2017 12:00:00 am

Example 3: Returns the current time

DateDiff(<date1>, <date2>, <units>)

Subtracts two dates and returns the difference in the specified units.

  • date1—The date value from which to subtract a second date.
  • date2—The date value to subtract from the first given date.
  • startpos (optional)—The units in which to return the difference of the two given dates. The supported unit types include milliseconds, seconds, minutes, hours, days, months, and years. The default value is milliseconds.

Example 1: DateDiff(Date(2017,1,14,0), Date())

Example 2: DateDiff(Date(2017,1,14,0), Date(), "Years")

Result will vary depending on when you run this command.

Example 1: -20532129137

Example 2: -0.6546783768647119

Year(<dateValue>)

Returns the year of the given date.

  • value—A date value from which to get the year.

Example 1: fieldname is a field of type Date with a value of 09 Oct 2017 04:30:43 pm.

Year($feature["fieldname"])

Example 2: fieldname is a string field formatted as an ISO 8601 string with a value of 2012-09-27.

Example 1: 2017

Example 2: 2012

Conditional operators

Conditional statements can use the following operators.

OperatorExplanationExampleResults

a > b

a < b

a is greater than b

a is less than b

10 > 2

False

a >= b

a <= b

a is greater than or equal to b

a is less than or equal to b

abs(-10) >= 10

True

a != b

a is not equal to b

abs(-3) != -3

True

a == b

a is equal to b

abs(-5) == 5

True

<condition1> || <condition2>

Condition 1 or condition 2 is met.

(abs(-5) == 5) || (10 < 2)

True

<condition1> && <condition2>

Condition 1 and condition 2 are met.

(abs(-5) == 5) && (10 < 2)

False

Logical operator examples

In addition to the conditional operators, more advanced logical operators can be used to calculate field values.

Learn more about logical functions available in Arcade

FunctionExplanationExampleResult

iif(<condition>,<true value>,<false value>)

Returns one value if a condition evaluates to true, and another value if the condition evaluates to false.

<true value> and <false value> can be the following:

  • A numeric field. If there is a space in the field name, use square brackets.
  • A number.
  • A function.

iif($feature["field1"] > $feature["field2"], $feature["field1"], 0)

iif($feature["field1"] > $feature["field2"], iif($feature["field2"] = 0, $feature["field3"], $feature["field4"]), 0)

Returns field1 if field1 is greater than field2, and 0 otherwise.

Returns the result of the second iif function if field1 is greater than field2, and 0 otherwise.

when(<expression1> , <result1> , <expression2> , <result2> , ... , <expressionN> , <resultN>, <default>)

Evaluates a series of expressions in turn until one evaluates to true.

  • expression—An expression.
  • result—Can be a number or field.
  • default—An optional value if none of the expressions match.

when(($feature["field1"] + 10) > 1, 1,($feature["field2"] + 10) > 2 , 2, $feature["field3"])

If field1 + 10 is greater than 1, it returns 1. If not, it checks if field2 + 10 is greater than 2. If it is, it returns 2. If not, it returns field3.

decode(<conditional val> , <case1> , <result1>, <case2>, <result2>, ... <caseN>, <resultN>, <defaultValue> )

The decode function evaluates an expression and compares its value with subsequent parameters. If the expression matches, it returns the next parameter value. If none match, there is the option for the last parameter to be a default return value.

  • conditional val—Can be a field or an expression.
  • case—A value to be compared to the conditional val.
  • result—The result if the corresponding case matches the conditional val.
  • defaultValue—An optional value if no other values are true.

decode($feature["field1"] + 3 , $feature["field1"], 1, $feature["field2"], 2, 0)

Compares equality between the conditional val field1 + 3 and case1 field1. If true, it returns 1. If false, it compares the equality between field1 + 3 and field2. If true, it returns 2; otherwise, it returns 0.