Editing events in the selection table

Mit der Location Referencing-Lizenz verfügbar.

After choosing event or point feature records using the event selection tools and widgets available in ArcGIS Event Editor, you can view and edit the tabulated results using the tools shown below. To select events, see the following:

• Selecting events by route
• Selecting events and routes by attribute
• Selecting events and routes by geometry

Hinweis:

In cases where events on a route are edited and you want to see the previous events on the route at that location, don't use the Add Linear Event widget. Instead, edit events in the Event Selection table or the Attribute Set table. If this method is used, you can see what was previously on the routes at the specified measures.

Tool	Tool Name	Description
	Clear Map Highlights	Clear all the event highlights on the map.
	Highlight All	Highlight all the selected events.
	Zoom To Highlighted Features	Zoom to highlighted events on the map.
	Zoom To Selected Features	Zoom to selected events on the map.
	Calculate Field	Bulk edit a field's value.
	Delete Highlighted Features	Delete the highlighted features. Visibility of this tool is configurable in the Event Editor config file.
	Export to CSV	Export the selected features as a file in the CSV file format.
	Advanced Table Sorting	Filter the attribute table view.
	Table Properties	Configure measure length and navigation to highlighted results.
	Select Point To Move	Select a point feature on the map to move the location. Hinweis: This tool is available only when using Address Management capabilities in Event Editor. It is designed to work with address point features.
	Related Tables	Show related records for the selected events. If you have multiple layers that represent the related data, you can choose the one to use to view the related data. Hinweis: This tool is enabled only if relationship information is available through the map service. To publish a relationship in the map service, you must have both the Origin table or event feature class and the Destination table in your map. Simple relationship classes with one-to-one (1:1) or one-to-many (1:M) relationships are supported.

Editing individual records

1. Double-click a cell in the table to allow its value to be edited.

   Edited cells in the table appear in yellow until saved.

   Hinweis:

   Domänen mit codierten Werten und Bereichsdomänen werden unterstützt, wenn dies für ein Feld in der Tabelle "Event Attributes" konfiguriert wurde.

2. To make the changes to the cells in the table permanent, click Save to save the edits.

   A Save Options dialog box may appear depending on your configuration.

   

3. Optionally choose a save option.

   Determining whether any of these options is applicable should be based on the reasons for editing the events.

   Hinweis:

   Merge coincident events with the same attributes that are edited only works with nonreferent events.

   • If the edits are for error correction or a similar workflow, and the event record does not need to be retired and time sliced because the changes are correcting a mistake, do not check the Retire edited events and create new events effective check box.
   • If the edits represent changes to the events at a certain time (such as a speed limit changing from 50 to 55 on 09/22/2014), check the Retire edited events and create new events effective check box and click the date drop-down arrow to choose the retirement date, or type the date in the date combo box. The old event will be retired and the new event will begin on the specified date.
   • If multiple edited events are coincident in measure and attributes and you want to combine them into a single event record, check the Merge coincident events with the same attributes that are edited check box.
   • If you want to keep events that are coincident in measure and attributes as different event records, do not check the Merge coincident events with the same attributes that are edited check box.
4. Klicken Sie auf OK.

Nachdem das bearbeitete Objekt gespeichert wurde, wird unten rechts eine Bestätigungsmeldung angezeigt.

Hinweis:

• If a cell is gray, it's unavailable and can't be edited.
• If a cell is white, it can be edited.
• If a cell is yellow, it has been edited in this edit session but the edits have not been saved.

Bulk editing event fields

If you want to enter the same value for a field in several events, follow the steps below.

1. Click the Calculate Field button on the toolbar of the Event Attributes table.

   The Field Calculator dialog box appears.

2. Click the Update Field drop-down arrow and choose the field to be updated.
3. Type a value for the field in the Field Value text box.

   Tipp:

   If the field has a coded value domain, choose a value from the Field Value drop-down menu. If the field is a date field, choose a date from the calendar.

   Hinweis:

   Domänen mit codierten Werten und Bereichsdomänen werden unterstützt, wenn dies für ein Feld in der Tabelle "Event Attributes" konfiguriert wurde.

4. Klicken Sie auf OK.

   The records in the Event Attribute table are updated.

5. Click Save.

   A Save Options dialog box may appear depending on your configuration.

   

6. Optionally choose a save option.

   Determining whether any of these options is applicable should be based on the reasons for editing the events.

   • If the edits are for error correction or a similar workflow and the event record does not need to be retired and time sliced because the changes are correcting a mistake, do not check the Retire edited events and create new events effective check box.
   • If the edits represent changes to the events at a certain time (such as a speed limit changing from 50 to 55 on 09/22/2014), check the Retire edited events and create new events effective check box and click the date drop-down arrow to choose the retirement date, or type the date in the date combo box. The old event will be retired and the new event will begin on the specified date.
   • If multiple edited events are coincident in measure and attributes and you want to combine them into a single event record, check the Merge coincident events with the same attributes that are edited check box.
   • If you want to keep events that are coincident in measure and attributes as different event records, do not check the Merge coincident events with the same attributes that are edited check box.
7. Klicken Sie auf OK.

Nachdem das bearbeitete Objekt gespeichert wurde, wird unten rechts eine Bestätigungsmeldung angezeigt.

All the rows in the field get the updated value from step 3.

Hinweis:

If you find an unavailable record, that is, none of its cells are editable, check to see if the event ID for that record is missing or null.

To prevent null event IDs when adding events, do the following:

• Ensure the event ID field's data type is a string with a minimum length of 32 characters. In such cases, when adding a new event and not providing a specified event ID, Event Editor automatically assigns a GUID to the event.
• If the event ID data type is not a string with a minimum of 32 characters, Event Editor will not automatically assign a GUID for the event. In such cases, define attribute sets to designate the event ID as an attribute for input. For more information about configuring and defining attribute sets, see Producing attribute sets and Configuring attribute sets.

Viewing related records

If relationship information is available through the map service, you will see the Related Tables button. To publish a relationship in the map service, the Origin table or the event feature class and the Destination table must be in your map document. Simple relationship classes with one-to-one (1:1) or one-to-many (1:M) relationships are supported.

Hinweis:

The records in the Related Records table are for viewing purposes only and can't be edited.

1. Click the Related Tables button .
   
2. Click the name of the related record you want to access for the selected events.

   If you have multiple layers that represent the related data, you can choose the one to use to view the related data.

Editing with conflict prevention enabled

When conflict prevention is enabled, you can edit an event’s attribute table after acquiring locks under these conditions:

• No one has a lock on the event layer in any versions of the feature service for the route on which the events will be located.
• You already have an event lock on the event layer in which you are currently working.
• You already have a lock on the route on which the event is located in the same database version.
• You already have a route lock on the concurrent route of another network, in the same version in which you're currently working.
• You can edit an event layer if other events along the same route have locks acquired by different persons in different versions.

When conflict prevention is enabled, you can't edit the event’s attributes under these conditions:

• The event layer is already locked by another person for the route on which the event is located.
• The event layer is already locked by you for the route on which the event is located but in a different version.
• The route on which the event is located is already locked by another person.
• The route on which the event is located is already locked by you but on a different version.
• The concurrent route on another network is already locked by you in another version or by a different person in a different version.