Listed below are issues you may encounter when working with the portal website and some recommended solutions.
- When searching for layers to add to a map, only web layers are listed.
- When searching for layers to add to a map, not all of my organization's layers are listed in the search results.
- The date and time in a pop-up do not match the date and time in the underlying data.
- Dates are formatted differently throughout the map.
- Time does not appear in the date field.
- I can't edit the geometry of a feature in an editable feature layer.
- When I print my map, some layers are missing.
- My map layer did not draw completely.
- Thumbnails for newly created web maps are not generated or do not display correctly.
- The map is missing a legend.
- The map legend is different from the legend I created for my feature layer.
- I can't reorder a layer in the map's contents.
- I lost the map I was working on.
- My web map contains a layer that is no longer available, and an error appears when I load the map. How do I remove this layer so that I can replace it with another one?
- The time slider does not appear in a map with a time-aware layer.
- There is no option to use my layer as a basemap.
- When I use my own basemap, some of the zoom levels in my basemap are missing on the map.
- My basemap is unavailable, so none of my map content appears.
- When I add an OGC WMS or WMTS layer to my map, I get an error that says the layer's coordinate system doesn't align with that of the basemap.
- The aerial imagery I added doesn't display on the map.
- My map layer does not appear in Map Viewer at the same scales for which I’ve cached tiles.
- I have issues accessing ArcGIS Server services and OGC layers secured with web-tier authentication in Internet Explorer.
- Some layers don't display correctly in the map. It looks like there is a mix of HTTP and HTTPS URLs. Is this mixed content negatively affecting the map display?
- When attempting to add a layer to the map or opening an existing map, I see a message that Map Viewer is unable to establish a secure connection to one or more layers.
- Some features are missing from my map.
- I cannot edit features I've added to my map.
- I do not see an option to configure pop-ups even though I know my service has feature data in it.
- I cannot remove pop-ups on a layer in the map.
- I do not see an option to save item properties on a layer I've updated in Map Viewer.
- Number fields from a CSV file on the web do not import correctly into the map.
- My organization has a Bing Maps key that can be used in maps shared publicly. I see the Bing Maps basemap in my maps but the public sees an ArcGIS Online basemap.
- I am having issues with styling.
- Search only suggests six features.
Hosted web layers
- I cannot publish a hosted tile layer from a hosted feature layer.
- I cannot publish my .txt file as a hosted feature layer.
- When I upload a .tpk file and try to publish as a hosted tile layer, I receive the error Unrecognized service type.Image service.
- I don't see an option to publish to my organization's portal using ArcGIS Desktop.
- I want to update my hosted feature layer.
- Publishing a hosted tile layer takes a long time.
- Publishing a service definition (.sd) file that I upload to my portal fails with the message Unable to publish item. This Item can't be published to Online Service.
- When I try to open service properties for my hosted layers in ArcGIS Desktop, I receive the error message Cannot view or edit service properties. Please try to access the service properties through the server directly..
- I cannot open an item in ArcGIS Desktop.
- When updating a layer package or map package item details, the image is updated even when I select keep item properties.
- I was prompted for a login when opening a layer package.
- Opening a globe layer returns an error message in ArcMap.
- When I click the Open in ArcGIS Desktop option on a layer item's details page to add the layer to ArcGIS Desktop or ArcGIS Explorer, the layer doesn't work. For example, in ArcMap, I see a new layer is added, but it doesn't draw. If I click the Open in Map Viewer option on the layer item's details page instead, the layer opens and draws in Map Viewer, so I know the server hosting the map service is up and running.
- I receive a software authorization error when I try to sign in to my portal from ArcGIS Desktop.
- When I open layer file (.lyr or .lyrx) or map document (.mxd or .mapx) in an ArcGIS Desktop client, some of the layers are missing.
The website has the following maximum limitations:
- Number of groups per user: 512
- Upload file size: 200 GB
- Thumbnail image size: 1 MB
- Sign in time: two weeks
- URL characters for adding items from the web: 1024
Portal for ArcGIS is licensed to allow a specific number of members. If the portal already has the maximum number of members for which it is licensed, no new accounts can be added, and you will see the message Unable to create a new account because of a software authorization error. Contact your Portal for ArcGIS administrator for assistance. Your portal administrator must either obtain a new license or remove existing members before any new ones can be added.
Portal for ArcGIS is licensed to allow a specific number of members. If portal members exceed that number, you will receive this message the next time you try to sign in to your portal: Unable to sign in because of a software authorization error. Contact your Portal for ArcGIS administrator for assistance. Your portal administrator must either obtain a new license or remove members from the portal.
When searching for layers to add to a map, not all of my organization's layers are listed in the search results.
Servers store dates in Coordinated Universal Time (UTC). Web browsers convert the date to local time. For example, if you look at a time field in a pop-up and you are located in California during standard daylight time, what you see is 8 hours earlier (UTC-8) than the time in the data. This offset might affect the date as well. If you look at a pop-up with data from 7/7/2017 12:00 a.m., you see 7/6/2017 5:00 p.m.
When viewing dates in Map Viewer, you might see different formats on different parts of the map. Map authors can configure the format that appears in pop-ups, tables, and labels. For other parts of the map, such as the time slider, the language associated with your account determines the date format.
Only short date formats display time (for example, 12/31/1999 and 31/12/1999). Time is not displayed as part of the date field for other date formats. To display time for date fields, you need to configure the date field in the pop-up to use one of the short date formats (and check the box to show time).
Depending on how your administrator has configured the print service, certain types of layers may not appear on a printed map. Contact your administrator for further information. Additionally, if you print a map using your browser print button, many other layers and logos may be missing as well. Use the Print button in Map Viewer for the most complete and well-formatted maps.
A layer may have too many features for Map Viewer to display all at once. When this happens, Map Viewer displays a warning that the layer did not draw completely. To see the omitted features, zoom in and move around the map.
You may encounter this problem if your web maps contain ArcGIS Server services that use HTTPS. A print service is used to generate thumbnails. If the machine with the print service that generates the thumbnails does not trust the ArcGIS Server site hosting the HTTPS services, the thumbnails are not generated or do not display correctly. To resolve this, contact your portal administrator and have them establish trust between the machine and the site.
Legends for feature layers may not match the legends saved in web maps. This typically happens when you save the layer in the web map with different symbology than that of the original layer. Symbology is saved to the web map when you save the map. Therefore, if you have different symbology saved to the layer and want to display the layer's legend in the web map, you must remove the layer from the web map and add it back.
Layers are always displayed on top of a basemap, and feature layers are always displayed on top of tileset layers (map image, imagery, and tile layers) and KML layers. Depending on the type of layers you have in your map, you may not be able to move them all up or down. For example, if you have one map image layer and three feature layers, you can reorder the feature layers, but you cannot move the map image layer on top of them.
You may lose your map when adding a secure layer while you are in HTTP or navigating away from Map Viewer when the map is too large for your browser to cache. To prevent losing your map when you add large amounts of data, sign in before you start working and periodically save your map (if you have privileges to create items). If you plan to add secure layers, change the Map Viewer URL to HTTPS and add the secure layers first.
My web map contains a layer that is no longer available, and an error appears when I load the map. How do I remove this layer so that I can replace it with another one?
This happens because the map displays the zoom levels of the current basemap, for example, the World Topographic basemap. To see the additional zoom levels in the basemap you've added, save your map, close the Map Viewer page (for example, go to the Gallery), and reopen the map. The additional zoom levels appear. You need privileges to create items in order to save your map.
Map Viewer can't display layers in a map without a working basemap because the basemap establishes the coordinate system of the map. Once you save a map with a basemap, Map Viewer only uses that basemap; it doesn't revert to a default basemap if yours is unavailable. You can repair your map by using a different basemap as long as the spatial reference of the bad and new basemap are the same. For basemaps that are tile layers, the tiling scheme of the bad and new basemaps must also be the same. Repair your map by choosing a different basemap from the gallery or using the URL parameter basemapUrl.
When I add an OGC WMS or WMTS layer to my map, I get an error that says the layer's coordinate system doesn't align with that of the basemap.
This error message usually appears when you added layers to your map, and you then add an OGC layer that is in a coordinate system other than Web Mercator (the projection of the basemaps in the default Map Viewer gallery). To remedy this, create a new map and add your OGC layer first. If your layer is in GCS WGS84, Map Viewer uses the GCS WGS84 World Imagery basemap. If your OGC WMS or WMTS layer is in a coordinate system other than Web Mercator or GCS WGS84, your layer is used as the basemap. If your WMTS layer supports multiple coordinate systems, you can select the one you want to use.
Tile layers that use aerial imagery may not display on the map if you are using a Web Mercator basemap (which is the projection of the basemaps in the Gallery) and the layer is not in Web Mercator. To display the layer, use it as the basemap or display it on top of a basemap that is in the same projection as the tile layer.
I have issues accessing ArcGIS Server services and OGC layers secured with web-tier authentication in Internet Explorer.
You may need to add the domains of your organization’s trusted servers to your browser’s trusted sites list. Check with you organization administrator for the trusted servers configured for your organization.
Some layers don't display correctly in the map. It looks like there is a mix of HTTP and HTTPS URLs. Is this mixed content negatively affecting the map display?
It depends. The specific behavior depends on your browser and browser version.
When you attempt to open an HTTPS-based layer in Map Viewer that's on HTTP, your browser may notify you that you must reload the page (in this case, Map Viewer) onto HTTPS and add the layer again. This applies to layers you add to your map and layers in existing maps. Some browsers may successfully load these layers without notification.
When you attempt to open an HTTP-based layer in Map Viewer that's on HTTPS, the layer may not load correctly or may behave differently across browsers and browser versions. This applies to layers you add to your map and layers in existing maps. Some browsers may successfully load these layers.
You can read more about mixed content from various browser providers.
When attempting to add a layer to the map or opening an existing map, I see a message that Map Viewer is unable to establish a secure connection to one or more layers.
It's likely that your organization is set up for HTTPS only, but the URL you provided is HTTP. Some browsers notify you or block mixed content. You can try switching the layer URL to HTTPS. You can also contact your administrator about configuring Transport Layer Security (TLS) on the server hosting the layer. TLS is a more recent and secure encryption protocol than Secure Sockets Layer (SSL) encryption protocols that provide secure communication across networks.
Large datasets should be published as hosted feature layers. When you add a shapefile, GeoJSON, CSV, TXT, or GPX file directly to Map Viewer, the features are stored in the web map, which increases the amount of data that must be downloaded each time the web map is opened. Publishing your data as a hosted feature layer allows the features in the dataset to be requested as needed rather than being stored in the web map.
When you add a text file (.txt or .csv) with addresses while signed in to your portal, 4,000 features can be added directly to the map. If you add a text file with addresses as an anonymous user or when you are not signed in, 250 features can be added directly to the map. Datasets with more features than this must be published as a hosted feature layer.
When you add a shapefile or GeoJSON file with point data, 4,000 features can be added directly to the map. When you add a shapefile or GeoJSON file with polygon or line data, 2,000 features can be added directly to the map. Datasets with more features than this must be published as a hosted feature layer. Shapefiles and GeoJSON files larger than 10 MB must be published as a hosted feature layer regardless of the number of features.
If you added a KML document, features from placemarks, network links, ground overlays without refresh properties, folders, and extended data are displayed. Other features are not supported at this time.
You can only save item properties on layers you have added.
If you are adding a CSV file from the web that uses periods as decimals, but your language is set to a system that expects commas for decimals, your number fields may not display correctly. The decimal characters in your file should match the format your system language expects. For example, if your system is set to English, your file should use periods as decimals. If your system is set to French, your file should use commas as decimals.
My organization has a Bing Maps key that can be used in maps shared publicly. I see the Bing Maps basemap in my maps but the public sees an ArcGIS Online basemap.
You can use My Stories to share subscriber content in Story Maps.
Hosted web layers
You cannot generate map tiles for a hosted tile layer published from a hosted feature layer if the hosted feature layer is configured with certain styles and saved to the hosted feature layer item.
Additionally, this workflow is only supported if your portal has a relational data store (ArcGIS Data Store) configured with its hosting server.
When I upload a .tpk file and try to publish as a hosted tile layer, I receive the error Unrecognized service type.Image service.
The following criteria must be met to publish to your organization's portal using ArcMap or ArcGIS Pro:
- ArcGIS Desktop must be connected to the correct portal. By default, ArcGIS Desktop connects to ArcGIS Online. Use the ArcGIS administrator to connect to your organization's portal from ArcMap. For full instructions, see Use ArcMap with your portal. In ArcGIS Pro, add your organization's portal to your project and make it the active portal.
- You must be signed in to your organization's portal to publish to it. In ArcGIS Pro, the active portal and your sign in status are displayed at the top of the project. In ArcMap, you click the File menu; if you see the Sign In option available, you are not signed in.
- You must be a member of a role that has permissions to publish to your organization's portal. You can check your member role by signing in to the portal website and selecting your name. This opens your member profile and will reveal your role in the organization.
- Your organization's portal must be configured with a hosting server. A hosting server allows portal members to publish hosted tile, feature, and scene layers to the portal. If no hosting server is present, you cannot publish to the portal. Contact your organization's portal administrator to determine if a hosting server has been configured. To learn more about hosted web layers, see About hosted web layers.
If you enabled editing on a hosted feature layer, you can edit the features and their display in Map Viewer.
If you published a hosted feature layer from the website, you can delete the feature layer, use the Update option on the related source file's item page to update the file, and use the Publish option to create a new hosted feature layer from the updated file. The feature layer will not be updated automatically after its source file is updated.
To update the data in hosted feature layers published from a file geodatabase, shapefile, GeoJSON, or CSV file containing latitude and longitude information, replace the data with data from an updated source file using the Overwrite option available on the hosted feature layer's item page.
The Overwrite option is only available for portals with a hosting server that uses a relational data store.
If you published the hosted feature layer from ArcMap, overwrite the service from ArcMap.
In general, the time it takes to render the tiles for a particular map is based on the spatial extent of the map to be cached and the number of layers in the map, as well as the load on the system at the time the map is being processed. The system is designed to scale automatically (by adding machines) as the load increases. However, lags are possible in cases where the system experiences drastic load.
Publishing a service definition (.sd) file that I upload to my portal fails with the message Unable to publish item. This Item can't be published to Online Service.
Service definition files for ArcGIS Server web services are different from service definition files for hosted tile layers. What you connect to when you save the service definition file determines what type of service definition file is created.
When you save a service definition file in ArcGIS Desktop, you must choose My Hosted Services when you Choose a connection to save a service definition file that can publish a hosted tile layer. You cannot connect to an ArcGIS Server or choose No available connection.
When I try to open service properties for my hosted layers in ArcGIS Desktop, I receive the error message Cannot view or edit service properties. Please try to access the service properties through the server directly..
I receive the message None of the configured nodes are available when I run GeoAnalytics Tools that create hosted feature layers that store data in the spatiotemporal big data store.
At least one of the machines in the spatiotemporal big data store contains multiple network interface controller (NIC) cards. Each card uses a different IP address to communicate, and the data store was not configured to use the correct IP address. Contact your ArcGIS Data Store administrator to correct the problem.
I receive the error message Out of Heap Area Exception when I add a feature layer to Map Viewer or query the layer.
If the feature layer includes a multipatch layer that contains large and complex features, the ArcGIS Server site on which the feature service is running can run out of heap memory. Contact the administrator of the ArcGIS GIS Server site on which the feature service is running, as he or she needs to increase the SOC maximum heap size setting for every machine in that site. The SOC maximum heap size setting is changed in the ArcGIS Server Administrator Directory.
To identify if a feature layer contains a multipatch layer, check the Geometry Type of each individual layer in the ArcGIS Server Services Directory. If the feature layer is an item in your portal, you can open the ArcGIS Server Services Directory information for each layer by opening the feature layer's details page and clicking the layer name on the Layers section of the Overview tab.
You must have ArcGIS Desktop 9.3.1 or later to open most items. Some items require a more recent version of ArcGIS Desktop—ArcGIS Desktop 10 or later is required to open ArcGIS Desktop add-in files, map packages, and Web Maps. ArcGIS 10.1 for Desktop or later is required to open geoprocessing packages, features, KML, locator packages, tile packages, tiles, and WMS layers.
ArcGIS Pro 1.1 or later is required to open ArcGIS Pro add-in files.
Note, that add-ins are backward compatible but not forward compatible. For example, an ArcGIS Pro 1.1 add-in can be opened by ArcGIS Pro 1.1 or a later release, but an ArcGIS Pro 1.2 add-in can only be opened by ArcGIS Pro 1.2 or a later release.
When updating a layer package or map package item details, the image is updated even when I select keep item properties.
When opening a package that has been shared with a group but not made public, you are prompted (through a pop-up dialog box) to enter your portal website user name and password. The dialog box includes an option to save your login information, which allows you to open shared packages without reentering your user name and password.
When I click the Open in ArcGIS Desktop option on a layer item's details page to add the layer to ArcGIS Desktop or ArcGIS Explorer, the layer doesn't work. For example, in ArcMap, I see a new layer is added, but it doesn't draw. If I click the Open in Map Viewer option on the layer item's details page instead, the layer opens and draws in Map Viewer, so I know the server hosting the map service is up and running.
This is a REST configuration issue on the GIS Server hosting the map service layer. It is causing the LYR files that are automatically generated when you click Open in ArcGIS Desktop to use the internal URL to the GIS Server site rather than the external URL. This same issue also causes the View in ArcMap and View in ArcGIS Explorer links to fail on the REST Services Directory page for the map service. This can only be fixed by the administrator of the GIS Server hosting the map service.
If you want to use services from a GIS Server site that has this issue, you can still add the map service to your map or globe in ArcGIS Desktop or ArcGIS Explorer Desktop by making a connection directly to the GIS Server site and following these steps:
- Open the Details page for the map service you want to work with and click the Map Contents link.
- Copy the first part of the URL of the Map Contents page, up to and including the word services, and delete the /rest part of the string so it has this format: https://gisserver:6080/arcgis/services.
- Open the Add ArcGIS Server dialog box inside the Catalog window and paste the string into the Server URL field. Within ArcGIS Explorer Desktop, open the Add Content dialog box and paste the string into the GIS Services field. You are now connected to the GIS Server site.
- Browse to the map service you want to work with.
- You could also contact the owner of the GIS Server site and let him or her know that this configuration issue needs to be fixed.
Portal for ArcGIS is licensed to allow a specific number of members. If portal members exceed that number, you receive this message the next time you try to sign in to your portal from ArcGIS Desktop: Error signing on to Portal for ArcGIS. Unable to sign in user because of software authorization error. Please contact your Portal for ArcGIS administrator for assistance. Your portal administrator must either obtain a new license or remove members from the portal.
When I open layer file (.lyr or .lyrx) or map document (.mxd or .mapx) in an ArcGIS Desktop client, some of the layers are missing.