The system and hardware requirements that are required to run ArcGIS Data Store are listed below. ArcGIS Data Store is a component of ArcGIS Enterprise; they both support the same operating systems and browsers.
Each type of ArcGIS Data Store requires different amounts of memory, disk space, and other resources. Ensure your machines meet the requirements for each. It is not recommended that you put more than one data store type on the same machine, but if you do, ensure your machine meets the combined requirements for all data stores and other software you have installed on the machine. Be aware, though, that resource contention on the machines could render one or more of the data stores inoperable.
It's recommended that you review the deprecation notice to determine if your hardware and software components are still compatible with the latest version of ArcGIS Data Store.
Linux operating system requirements
The following 64-bit operating systems satisfy the minimum operating system requirements.
ArcGIS Data Store is only supported on Linux x86_64, on CPUs that adhere to the x86_64 architecture (64-bit), with supported Linux releases.
Machines with an underscore (_) in the name are not supported. The setup does not proceed if an underscore is detected in the machine name.
You cannot install the software as a root user. If you attempt to do this, the installation will not proceed and a diagnostics tool will display an error message indicating that you cannot install as root.
Do not install the software on an operating system (binary) that has been modified. Esri does not provide support for products installed on a developer's release of an operating system.
| Supported operating system | Latest update or service pack tested |
|---|---|
Red Hat Enterprise Linux Server 9 | Update 4 |
Red Hat Enterprise Linux Server 8 | Update 10 |
AlmaLinux 9 | Update 4 |
SUSE Linux Enterprise Server 15 | Service Pack 5 |
Ubuntu Server 24.04 LTS | 24.04.0 |
Ubuntu Server 22.04 LTS | 22.04.4 |
Oracle Linux 9 | Update 4 |
Oracle Linux 8 | Update 10 |
Rocky Linux 9 | Update 4 |
Rocky Linux 8 | Update 10 |
Prior and future updates or service packs for these operating system versions are supported unless otherwise stated. The operating system version and updates must also be supported by the operating system provider.
Note:
Esri Technical Support is no longer available for CentOS and Scientific Linux.
Tip:
The X Window System package group is required on the machine to run the following using the operating system graphical user interface (GUI):
- The ArcGIS Data Store installation wizard
- The ArcGIS Software Authorization Wizard
- The Check for Updates tool
The following package groups are required.
Red Hat Enterprise Linux Server and Oracle Linux
- gettext
SUSE Linux Enterprise Server
- gettext-runtime
Ubuntu Server LTS
- gettext-base
Disk space requirements
To install and configure ArcGIS Data Store requires a minimum of 13 GB of available disk space on the system drive. This is the minimum disk space requirement for a machine with one empty data store type; it does not take into account all the data you will store in the data store or backup files that might be stored on the machine. Given this requirement, plan to install ArcGIS Data Store on machines with large quantities of available disk space.
Note:
Monitor your data store logs so you are aware when a machine begins to run out of disk space. When a relational data store, spatiotemporal big data store, or object store machine contains less than 10 GB of free disk space, ArcGIS Data Store begins logging warnings that you are running out of disk space. If you configure email notifications for the portal, the administrative contacts in that list will receive an email when the machines get close to running out of disk space. Once the disk drive contains less than 5 GB of free space, the relational and spatiotemporal big data stores and the object store are placed in read-only mode, and the graph store shuts down. At this point, administrative contacts will receive another email indicating the data store is in read-only mode or shut down.
To determine the amount of disk space needed on a dedicated ArcGIS Data Store machine, take all of the following into consideration:
- The software installation uses 3 GB of disk space.
- Each data store uses an additional amount of space when created and still empty:
- Spatiotemporal big data store = 200 MB
- Tile cache data store = 1 MB
- Graph store = 100 MB
- Object store = 500 MB
- Relational data store = 2.5 GB*
*An empty relational data store uses up to 2.5 GB of disk space over time, to support high availability and a reliable backup policy. Upon configuration of the relational data store, approximately 200 MB of disk space is used. The amount of disk space used by the empty relational data store will grow by about 200 MB per hour over the course of 11 hours until settling at 2.5 GB at that time. Data stored in the system during use is in addition to this baseline storage requirement.
- A minimum of 20 percent of the disk space on each machine must be available for temporary files when configuring or upgrading a spatiotemporal big data store.
- You must estimate the amount of disk space needed for the data stored in the data stores. The numbers above are the minimum for empty data stores. That amount of free disk space allows you to create the data store. Additional space is needed to use it.
- Backup files stored on the data store machine also consume disk space. If you do not configure backups to be written to a shared location or cloud storage, you must plan for this additional use of disk space.
Memory requirements
The minimum memory required to configure a single, empty ArcGIS Data Store on a machine varies by type.
Note:
Meeting the minimum free memory requirements ensures the data store will start. Once in use, additional memory is required.
The following minimum memory requirements assume you install each type of ArcGIS Data Store on its own machine; no other data store type or ArcGIS Enterprise component is installed on the machine. Amounts listed reflect the amount of free memory that must be available on the machine before installing ArcGIS Data Store and configuring a data store.
- Relational data store = 8 GB
- Spatiotemporal big data store = 16 GB
- Tile cache data store = 8 GB
- Graph store = 32 GB
- Object store = 16 GB
Note:
For better performance, the object store requires a minimum of 32 GB of free memory.
Temp space requirements
By default, resources are extracted to the system /tmp directory. If the required space is not available in the /tmp directory, the setup program will attempt to extract resources to the user's HOME directory. If the required space is not available in the user's HOME directory, the setup program will report an error indicating this problem. Optionally, you can specify an alternate temp location by setting the IATEMPDIR environment variable.
File handle and process limits
ArcGIS Data Store is a data-intensive product, and many of its data formats consist of hundreds of thousands of files. In heavily used systems, thousands or tens of thousands of files may be in use at any given time. If there are insufficient file handles and processes, the data store cannot start. Even if there are sufficient processes and file handles to start, requests may start failing randomly once data is loaded and people start accessing services, leading to system downtime. The actual number of file handles and processes needed varies based on the data and the number of instances (threads or processes) running.
There are soft and hard limits for file handles, file sizes, and processes on Linux. To determine the hard limits, use the ulimit -Hn -Hu (or limit -h descriptors if you're using csh) command. To determine the soft limits, use the ulimit -Sn -Su (or limit descriptors if you're using csh) command.
The minimum file handle limit is 65,535 for the relational data store and 65,536 for the spatiotemporal big data store. The minimum process limit for relational and spatiotemporal big data store types is 25,059. These minimum settings only ensure ArcGIS Data Store can start. It is recommended that you set higher limits to help ensure that the system remains running.
For graph stores, set the file handle and process limits to unlimited.
Standard Linux file handle limits are sufficient for the object store.
To increase the soft and hard limits, edit the /etc/security/limits.conf file with superuser access. Which lines and settings you add to the file vary depending on the type of data store you configure.
See the next section for /etc/security/limits.conf file settings for spatiotemporal big data store machines.
The following example is for a relational data store machine. Replace limits with numbers appropriate to your uses.
<ArcGIS Data Store installation user> soft nofile <file limit>
<ArcGIS Data Store installation user> hard nofile <file limit>
<ArcGIS Data Store installation user> soft nproc <process limit>
<ArcGIS Data Store installation user> hard nproc <process limit>The <ArcGIS Data Store installation user> is the name of the login you use to install ArcGIS Data Store.
Log back in with the user you specified for <ArcGIS Data Store installation user> for the file handle and process limit values to take effect. To verify that the limits have been modified appropriately, use the ulimit -Hn -Hu and ulimit -Sn -Su commands as described above.
If you use SystemD to bootstrap starting and stopping the ArcGIS Data Store service, verify that DefaultLimitNOFILE and DefaultLimitNPROC limits in the /etc/systemd/system.conf file are set to 65536 and 25059 respectively
After changing process and file handle limits, you must restart ArcGIS Data Store.
Environment settings for spatiotemporal big data stores
Spatiotemporal big data stores store and access large amounts of feature data. To accommodate this, additional environment settings are required for these types of data stores.
As mentioned in the previous section, the minimum file handle and process settings for spatiotemporal big data stores are 65,536 and 25,059, respectively. In addition, you must set file size and virtual memory to unlimited.
Set all of these limits in the /etc/security/limits.conf file. The following is an example of file limit, file size, process, and virtual memory settings in the /etc/security/limits.conf file on spatiotemporal big data store machines:
<ArcGIS Data Store installation user> soft nofile <file limit>
<ArcGIS Data Store installation user> hard nofile <file limit>
<ArcGIS Data Store installation user> soft fsize unlimited
<ArcGIS Data Store installation user> hard fsize unlimited
<ArcGIS Data Store installation user> soft nproc <process limit>
<ArcGIS Data Store installation user> hard nproc <process limit>
<ArcGIS Data Store installation user> soft as unlimited
<ArcGIS Data Store installation user> hard as unlimitedThe <ArcGIS Data Store installation user> is the name of the login you use to install ArcGIS Data Store.
Log back in with the user you specified for <ArcGIS Data Store installation user> for the file handle and process limit values to take effect. To verify that the limits have been modified appropriately, use the ulimit -Hn -Hu and ulimit -Sn -Su commands as described above.
Next, change the following system virtual memory settings:
- vm.max_map_count must be set to at least 262144. If you do not set this, you may receive out-of-memory exceptions.
- vm.swappiness must be set to 1; otherwise, it will negatively affect the performance of the spatiotemporal big data store.
Virtual memory settings apply to the whole system rather than the ArcGIS Data Store installation user. To configure your virtual memory settings, you must update the /etc/sysctl.conf file with the following virtual memory values. Replace the map count with a number appropriate for your use.
vm.max_map_count = <map count>
vm.swappiness = 1
After changing process, file, and virtual memory limits, you must restart ArcGIS Data Store.
Minimum CPU architecture requirements for graph stores
The processors in the machines where you install the graph store must use the Advanced Vector Extension 2 (AVX2) instruction set architecture.
Firewall settings
ArcGIS Data Store uses specific ports to communicate with the portal, the hosting server, and machines inside the data store.
See Ports used by ArcGIS Data Store for information on the ports you must open in the firewall and on machines to allow this communication to take place.
Supported web browsers
ArcGIS Data Store administration resources and the Data Store Configuration wizard require one of the following web browsers:
- Google Chrome version 122 and later
- Microsoft Edge version 122 and later
- Mozilla Firefox version 125 and later
- Mozilla Firefox version 115 (ESR)
- Safari version 16 and later
Supported virtualization environments and cloud platforms
Virtualization and cloud environment support is the same for all components of a base ArcGIS Enterprise deployment. See ArcGIS Enterprise on cloud platforms and Supported virtualization environments in ArcGIS Enterprise system requirements for details.