Configuring ArcGIS Maritime

Disponible avec une licence Production Mapping.

ArcGIS Maritime uses a server object extension (SOE). You must add the SOE to a map service in your ArcGIS site to enable Maritime Chart Service functionality for the map service.

Remarque :

Review the following system requirement information before you set up your service:

• Mapped network drives are not recommended for your workspaceDirectories property setting due to potential performance issues. You should have your .senc files on the physical server.
• Maritime Chart Service can only be enabled on a dedicated instance type. Shared instance pools are not supported.
• You will exceed a URL length of 2,048 characters if you use display parameters in your GET request. POST is not necessarily supported in all third-party apps. If you cannot support POST in your apps, it is recommended that you increase your allowable URL length using a web.config.xml file.
• For deploying Product on Demand (PoD), you are required to use web.config.xml to increase your default URL length.

Enabling Maritime Chart Service

Perform the following steps to enable Maritime Chart Service:

1. Create a folder called maritimeserver in the ArcGIS Server site at <ArcGIS Server installation drive>\arcgisserver\directories.

   Remarque :

   If this location doesn't exist, verify that your ArcGIS Server site has been created.

   Learn more about creating a new site

2. Copy the maritimechartservice folder from <ArcGIS Server Installation Directory>\MaritimeServer\Server<version> to the maritimeserver folder created in step 1.
3. Sign in as a server manager by launching https://gisserver.domain.com/arcgis/manager.
4. Click the Site tab.
5. In the GIS Server pane, click Extensions.
6. Click Add Extention.
7. Click Browse and browse to <ArcGIS Install Directory>\MaritimeServer\Server<version>\Bin.
8. Click MaritimeServer.soe.
9. Cliquez sur Ajouter.

   MaritimeServer.soe is now successfully added.

10. Click the Services tab.
11. Click your map service.
12. In the Map Services pane, click Capabilities.
13. Check the Maritime Chart Service check box.
14. Verify all the properties.

    Remarque :

    The MaritimeServer.soe uses the maritimechartservice folder mentioned in step 2 to automatically populate the Maritime Chart Service Capabilities properties.

15. Click Save and Restart in ArcGIS Server Manager to restart the map service.

    Maritime Chart Service capabilities are now enabled.

16. You are now ready to load S-57 and S-63 datasets to your map service.

    Remarque :

    You can to modify your default configuration settings.

Remarque :

If you installed Maritime Chart Service in a cluster, you only need to enable it on one of the machines in the cluster. The configuration changes are automatically applied to the other machines in the cluster.

Learn more about creating a Maritime Chart Service tile package using S-57 and S-63 datasets

Deploying Products on Demand

ArcGIS Maritime allows you to deploy a web-based app to generate information map products in real time and allows you to create any product at any scale.

Copy the productsondemand folder

Copy the productsondemand folder from the Products on Demand (PoD) installation to the deployment location. The files in the installation location can be treated as a backup; the files in the deployment location are modified as needed. Copy the folder to <ArcGIS Server installation drive>\arcgisserver\directories\ maritimeserver l so the PoD folder and maritime server folder are in the same directory.

Perform the steps below to deploy PoD in your ArcGIS Server site.

Remarque :

To complete the following deployment steps for PoD, you must have a map service with Maritime Chart Service enabled.

1. If necessary, create a folder called maritimeserver in the ArcGIS Server site at <ArcGIS Server installation drive>\arcgisserver\directories.

   Remarque :

   If this location doesn't exist, verify that your ArcGIS Server site has been created and Maritime Chart Service enabled.

2. Copy the productsondemand folder from <ArcGIS Server Installation Directory>\MaritimeServer\Server<version> to the maritimeserver folder created in step 1.
3. Configure the ArcGIS Server account.

Sharing and permissions

Share and add permissions to your <ArcGIS Server installation drive>\arcgisserver folder using the steps below to ensure that your ArcGIS Server account user has full control permission on this folder.

Remarque :

PoD product export processing writes or modifies necessary files under this folder.

1. Right-click the arcgisserver folder and choose Properties.
2. Click the Sharing tab.
3. Click Advanced Sharing.
4. Check the Share this folder check box.
5. Click Permissions.
6. Click Add on the Share Permissions tab.
7. Add your ArcGIS Server account user.

   Remarque :

   By default, this user is usually ArcGIS.

8. Once the user is added, click OK to close the Select Users or Groups dialog box.
9. Choose the newly added user on the Share Permissions tab and choose Full Control.
10. Cliquez sur OK.
11. Click OK again to close the Advanced Sharing dialog box.
12. Cliquez sur Fermer.

Publishing service definition files

Publish the two service definition files to ArcGIS Server for PoD to calculate the area of interest (AOI) extent when you create an extent on the map to export a PDF chart.

1. Sign in as a server manager by launching https://gisserver.domain.com/arcgis/manager.

   Remarque :

   Publish the service definition files using ArcGIS Server Manager. To streamline deployment, it is recommended that you create a folder in ArcGIS Server Manager named POD to organize your PoD-related services.

2. Click Services > Manage Services, choose the POD folder, and click Publish Service.
3. Click Choose File to browse to the service definition you want to publish, or type the path to the file.

   The default location is <ArcGIS Server installation drive>\arcgisserver\directories\ maritimeserver\productsondemand\ServiceDefinitionFiles.

4. Choose Calculators.sd and click Open.

   Attention :

   Do not change the name of the service. If you do, the web app will not work.

   By default, the service definition is published to the server folder specified in the service definition configuration. To change the folder where the service definition is published, choose a folder from the drop-down list or click New.

   Remarque :

   All PoD service definitions must be in the same folder to properly deploy PoD. It is recommended that you create a folder to organize your PoD-related services. The default is POD.

5. Click Next.

   You must specify properties for your new service. No additional capabilities need to be chosen.

6. Click Back or Next as necessary.
7. Click Publish.
8. Repeat steps 3 through 6 for ExportWebmap.sd.

Updating your Utilities.py file

Update your Utilities.py file after you publish your PoD service definition files so your Calculators and ExportWebmap geoprocessing services use the updated file.

1. In Windows Explorer, browse to the Utilities.py file and edit it.

   The default location is <ArcGIS Server installation drive>\arcgisserver\directories\ maritimeserver \productsondemand\Tools.

2. Update the following variables:
   • shared_products_path and output_directory—Update with your machine name and domain, and update the path if you did not use the recommended default settings.
   • output_url—localhost is used only for local testing. Otherwise, update this variable with your machine name and domain, and update the path if you did not use the recommended default settings.
3. Save your changes to Utilities.py and click Exit.
4. Copy your updated Utilities.py file to your newly published Calculators and ExportWebmap PoD services arcgisinput location.
5. Browse to your arcgisinput location for POD. The default location is <ArcGIS Server installation drive>\arcgisserver\directories\arcgissystem\arcgisinput\POD.
   • Copy your updated Utilities.py file located in step 1 to <ArcGIS Server installation drive>\arcgisserver\directories\arcgissystem\arcgisinput\POD\Calculators.GPServer\extracted\p20\tools.
   • Copy your updated Utilities.py file located in step 1 to <ArcGIS Server installation drive>\arcgisserver\directories\arcgissystem\arcgisinput\POD\ExportWebmap.GPServer\extracted\p20\tools
6. In ArcGIS Server Manager, click Services > Manage Services.
7. Click Folders > POD.
8. Restart your Calculators and ExportWebmap geoprocessing services.

Updating geoenabled notes

Geoenabled notes allow you to generate textual notes for PoD outputs based on the geographic location of the product.

The notes are stored in a multipart polygon feature class, in which each record has a text field that contains the note. When a new product AOI is inserted, the AOI is intersected with the geoenabled notes polygon layer, and a separate A4 sheet is appended to the GeoPDF export. If there is more than a single page of notes, a second page is generated, and so on.

Perform the following steps to customize geoenabled notes:

1. Unzip Notes.gdb.zip in <ArcGIS Server installation drive>\arcgisserver\directories\maritimeserver\productsondemand\LayoutTemplates\Notes.gdb.

   Astuce :

   A sample notes geodatabase exists in the Notes.zip file.

2. Add multipart polygon features in the FeatureClassForNotes feature class that is in the Notes.gdb folder.

   Astuce :

   • Sample notes are in the FeatureClassForNotes_Sample feature class in the Notes.gdb folder.
   • Multipart polygons allow you to have several geographic locations that share the same note text without redundancy.
3. Edit the fields in the FeatureClassForNotes feature class as follows:

Notes	Title	Color	minScale	maxScale
This is a mandatory field. Note text or body of the paragraph.	This is an optional field. The name of the note that will print above the note paragraph.	This is an optional field. Red, Green, Blue (RGB) value of the note paragraph and title. Separate values with a single comma (,). The note will appear with black text if the field is empty, null, or has invalid values. Note: This field doesn't comply with CMYK.	This is an optional field. Specify the largest scale chart on which the note will appear. For example, if a note should appear on charts between 1:40000 and 1:90000, type 40000 in the field.	This is an optional field. Specify the smallest scale chart on which the note will appear. For example, if a note should appear on charts between 1:40000 and 1:90000, type 90000 in the field.

Customizing layout templates

You can customize the layout templates as described below.

Map elements

Products on Demand provides several layout templates for various page sizes and orientation. Each layout contains map elements, such as scale bars, north arrows, and legends, as well as logos, text, or other graphics that are created for specific purposes in the chart. Layout elements can also be map frames.

With the latest release of Maritime Chart Service, templates for page sizes A0 and ANSI E have common chart notes added to them. You can modify these notes to fit your local needs. If you do not want to create A0 or ANSI E sized charts with notes, you can remove those templates from your setup and replace them with the previous versions of those templates now renamed with a _withoutnotes suffix.

Astuce :

Rename your A0 and ANSI E templates, for example, with a _withnotes suffix in their name. Remove the _withoutnotes from your backup A0 and ANSI E templates. The system recognizes the A0 and ANSI E templates that no longer have common notes.

By default, the layout template font is Arial.

Managing elements

During product creation, the map elements are updated dynamically to reflect changes in the chart such as scale, geographic extent, and generation date. Products on Demand uses the names of elements to manage and identify which elements are to be modified by the automation script. Map element names should not be changed. If names are modified, the element cannot be managed using the automation script. If necessary, you can access the name by clicking Element Name on the Size and Position tab on the Properties dialog box.

Map frame

The AOI generated in the Products on Demand web app is obtained from the layout template's map frames. A calculator finds the bottom left corner of the data frame; then it finds the left and bottom edge. Changing the map frame size impacts AOI size.

Configuring the web app

Once you publish your services definition files, update your layout templates, publish a map service with Maritime Chart Service enabled and update your Utilities.py file, you are ready to configure and deploy the Products on Demand web app.

1. Browse to <ArcGIS Server Installation Directory>\MaritimeServer\Server<version>\WebApplications and copy the pod folder to C:\inetpub\wwwroot if using IIS to deploy your web app.

   Remarque :

   You can rename the pod folder POD. This is the name of the app you access on the web.

2. Register your web app and get the App ID. See the Add Apps section for more information.

   You can also register your web app through your portal.

3. Update your podconfig.js file located under pod\js.
   • Update serviceURL to the location created in step 2 of Publishing service definition files. If defaults were used, the path is https://gisserver.domain.com/arcgis/rest/services/POD.
   • Update MCSURL to the map service with Maritime Chart Service enabled. If you enabled Maritime Chart Service for SampleWorldCities, the path is https://gisserver.domain.com/arcgis/rest/services/SampleWorldCities/MapServer/exts/MaritimeChartService/MapServer.

     Remarque :

     The app uses the Esri Ocean basemap. You can choose another basemap by modifying the basemap variable.

   • Update appID with the App ID created in step 2. This allows you to sign in to ArcGIS Online or your portal account.
4. Save changes to your podconfig.js file.

You are now ready to use the Products on Demand app.

Registering the web app through your portal

To register your web app through your portal, do the following:

1. If you use Internet Information Server (IIS), choose Windows Explorer and search for C:\inetpub\wwwroot\pod.
2. In the widgets\AddData folder, open Widget.js.
3. Update portalUrl to https://portalserver.domain.com/arcgis.
4. Cliquez sur Enregistrer.
5. In the widgets\LayerList folder, open Widget.js.
6. Under appConfig, update portalUrl to https://portalserver.domain.com/arcgis.
7. Cliquez sur Enregistrer.
8. In the js folder, open SignInButton.js
9. Uncomment // portalUrl: "https://portalserver.domain.com/arcgis", and update the portalUrl.
10. Cliquez sur Enregistrer.

Troubleshooting the Maritime Server configuration

I don't see Maritime Chart Service data in my Products on Demand app.

Verify that the MCSURL set in step 3 of the Configuring the web app section is accessible to the user accessing the app.

I received an Unable to complete Operation error.

Add Configure ArcGIS Server Account to the installation directory if the error Unable to complete Operation. Error Executing tool. CalculateExtent. occurs.

My Maritime Chart Service doesn't display or disappears after changing my display properties.

Determine whether you exceeded your server URL length of 2048 characters when using display parameters. If so, increase your allowable URL length using a web.config.xml file.

What if I observe a possible error due to failure of enabling HTTPS on the web server?

Verify if you have enabled HTTPS on your web server.